1. General Introduction
The input voltage range is 18 to 30 volt dc and the input current source is 6 mA at 24 V. The inputs are divided into two individually isolated groups with eight channels and one voltage supervision input in each group. Every input channel consists of current limiting components, EMC protection components, input state indication LED and optical isolation barrier. The process voltage supervision input give channel error signals if the voltage disappears. The error signal can be read through the Module Bus.
2. Specification of DI814
General info | |
Type | Digital Input |
Signal specification | 24 V d.c. |
Article number | 3BUR001454R1 |
Number of channels | 16 |
Signal type | Current sourcing |
HART | No |
SOE | No |
Redundancy | No |
High Integrity | No |
Intrinsic safety | No |
Mechanics | S800 |
Detailed data | |
Input voltage range, "0" | -30 .. 5 V |
Input voltage range, "1" | 15 .. 30 V |
Input impedance | 3.5 kΩ |
Isolation | GroupWise isolated from ground, 2 groups with 8 channels |
Filter times (digital, selectable) | 2, 4, 8, 16 ms |
Current limiting | Sensor power can be current limited by the MTU |
Maximum field cable length | 600 meters (656 yards) |
Rated insulation voltage | 50 V |
Dielectric test voltage | 500V a.c. |
Power dissipation | Typ.1.8 W |
Current consumption +5 V Module bus | 50 mA |
Current consumption +24 V Module bus | 0 |
Current consumption +24 V external | 0 |
Diagnostics | |
Front LED’s | S(tatus) (run or fault), Channel 1-16 ("0" or "1") |
Supervision | Process voltage, 1 per group |
Status indication of supervision | Module Error, Module Warning, Channel error |
Environmental and certification | |
CE mark | Yes |
Electrical safety | IEC 61131-2, UL 508 |
Hazardous location | C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2 |
Marine certification | ABS, BV, DNV-GL, LR, RS, CCS |
Protection rating | IP20 according to IEC 60529 |
Corrosive atmosphere ISA-S71.04 | G3 |
Climatic operating conditions | 0 to +55 °C (Storage -25 to +70 °C), RH=5 to 95 % no condensation, IEC/EN61131-2 |
Pollution degree | Degree 2, IEC 60664-1 |
Mechanical operating conditions | IEC/EN 61131-2 |
EMC | EN 61000-6-4 and EN 61000-6-2 |
Overvoltage categories | IEC/EN 60664-1, EN 50178 |
Equipment class | Class I according to IEC 61140; (earth protected) |
Max ambient temperature | 55 °C (131 °F), for vertical mounting 40 °C (104 °F) |
RoHS compliance | DIRECTIVE/2011/65/EU (EN 50581:2012) |
WEEE compliance | DIRECTIVE/2012/19/EU |
Comp ability | |
Use with MTU | TU810, TU812, TU814, TU830, TU838 |
Keying code | BE |
Dimensions | |
Width | 45 mm (1.77”) |
Depth | 102 mm (4.01”), 111 mm (4.37”) including connector |
Height | 119 mm (4.7”) |
Weight | 0.15 kg (0.33 lbs.) |
3. Selection table of I/O Modules
Name | HART | High Integrity | Intrinsic safety | Mechanics | Redundancy | SOE | Type |
DI801 | No | No | No | S800L | No | No | Digital Input |
DI802 | No | No | No | S800L | No | No | Digital Input |
DI803 | No | No | No | S800L | No | No | Digital Input |
DI810 | No | No | No | S800 | No | No | Digital Input |
DI811 | No | No | No | S800 | No | No | Digital Input |
DI814 | No | No | No | S800 | No | No | Digital Input |
DI818 | No | No | No | S800 | No | No | Digital Input |
DI820 | No | No | No | S800 | No | No | Digital Input |
DI821 | No | No | No | S800 | No | No | Digital Input |
DI825 | No | No | No | S800 | No | Yes | Digital Input |
DI828 | No | No | No | S800 | No | No | Digital Input |
DI830 | No | No | No | S800 | No | Yes | Digital Input |
DI831 | No | No | No | S800 | No | Yes | Digital Input |
DI840 | No | No | No | S800 | Yes | Yes | Digital Input |
DI880 | No | Yes | No | S800 | Yes | Yes | Digital Input |
DI890 | No | No | Yes | S800 | No | No | Digital Input |
DO801 | No | No | No | S800L | No | No | Digital Output |
DO802 | No | No | No | S800L | No | No | Digital Output |
DO810 | No | No | No | S800 | No | No | Digital Output |
DO814 | No | No | No | S800 | No | No | Digital Output |
DO815 | No | No | No | S800 | No | No | Digital Output |
DO818 | No | No | No | S800 | No | No | Digital Output |
DO820 | No | No | No | S800 | No | No | Digital Output |
DO821 | No | No | No | S800 | No | No | Digital Output |
DO828 | No | No | No | S800 | No | No | Digital Output |
DO840 | No | No | No | S800 | Yes | No | Digital Output |
DO880 | No | Yes | No | S800 | Yes | No | Digital Output |
DO890 | No | No | Yes | S800 | No | No | Digital Output |
