The PM866AK02 controller has reliability and simple fault diagnosis procedures, modularity, allowing for step-by-step expansion, IP20 Class protection without the requirement for enclosures. The controller can be configured with 800xA control builder and has full EMC...Read More
The ABB SD854 has DIN-rail mounting, width 48 mm; efficiency up to 95.6%; 20% Output Power Reserves; Easy Fuse Breaking – 3 times nominal current for 12ms; Active Power Factor Correction (PFC); Minimal Inrush Current Surge; temperature range -25°C and +70°C (derating 12W / °C...Read More
The ABB SD853 DIN-rail mounting, Width 39mm; efficiency up to 95.2%; 20% Output Power Reserves; easy Fuse Breaking due to High Overload Peak Current; Active Power Factor Correction (PFC); Minimal Inrush Current Surge; temperature range -25°C and +70°C (derating 6W / °C...Read More
The ABB SD834 has simple DIN-rail mounting; class I Equipment, (when connected to Protective Earth, (PE)); over-voltage Category III for connection to primary main TN network; protective separation of secondary circuit from primary circuit and accepted for SELV and PELV...Read More
The ABB SD833 has simple DIN-rail mounting; class I Equipment, (when connected to Protective Earth, (PE)); over-voltage Category III for connection to primary main TN network; protective separation of secondary circuit from primary circuit and accepted for SELV and PELV...Read More
The ABB SD832 has simple DIN-rail mounting; class I Equipment, (when connected to Protective Earth, (PE)); over-voltage Category III for connection to primary main TN network; protective separation of secondary circuit from primary circuit and accepted for SELV and PELV...Read More
The ABB SD831 has simple DIN-rail mounting; class I Equipment, (when connected to Protective Earth, (PE)); over-voltage Category III for connection to primary main TN network; protective separation of secondary circuit from primary circuit and accepted for SELV and PELV...Read More
The ABB NE871 has redundant power supply and alarm function; wide operating voltage range (16 VDC to 60 VDC); back end holds a casted DIN-clip for stable mounting on a DIN-rail; digital IO for monitoring and console port for management using CLI; USB port for easy save and...Read More
The ABB NE870 has redundant power supply and alarm function; wide operating voltage range (16 VDC to 60 VDC); back end holds a casted DIN-clip for stable mounting on a DIN-rail; digital IO for monitoring and console port for management using CLI; USB port for easy save and...Read More
The ABB NE840 is designed for installation in 19” rack solutions according to ETSI; standard with a shallow depth of 240 mm. NE840 has a USB 2.0 host interface and NE840 can also be wall mounted as an installation option, each SFP slot can hold one SFP transceiver for copper...Read More
The ABB NE820 has redundant power supply and alarm function; wide operating voltage range (16 VDC to 60 VDC); digital IO for monitoring; console port for management using CLI and USB port for easy save and load system configuration; 3 x RJ-45 Ethernet 1000BaseTX connectors;...Read More
The ABB NE810 pre-configured for use with System 800xA. NE810 supports redundant power connection; enhanced monitoring using PNSM; industrial Ethernet 10-port switch and long life duration; fully supported by ABB.
Brand: ABB
Place of origin: Sweden
...Read More
We are professional 800x suppliers and contractors in Dubai of UAE, involved in engineering, programming and installation service. Our factory provides high quality integrator products for Yokogawa and ABB. We also supply wide range of revamping, upgrading, commissioning, immigration and configuration spare parts service. Be free to buy 800x at good price here and get quotation from us.