The CI873 supports connection for S200 I/O via 200-AENTR adaptor and Ethernet/IP and Device Net protocols.
Brand: ABB
Place of origin: Sweden
Delivery: 8 to 10 weeksRead More
The AC 100 OPC Server runs in the Connectivity Server and requires the AF 100 hardware interface CI527A installed in the same node as the AC 100 OPC Server. In the other end you use the CI869 to connect to the AC 800M controller network. Advant Field bus 100 redundancy is...Read More
Allows communication via both protocols defined by IEC 61850 standards: MMS (client) and GOOSE. A maximum of 80 IEDs (GOOSE) and 20 IEDs (MMS) is allowed per CI868. The combination of both protocols in the same module is allowed. (20IEDs /CI868). Up to 12 modules can be used...Read More
The CI867 can be set redundant and supports hot swap. CI867 is a dual channel Ethernet unit; Ch1 supports full duplex with 100 Mbps speed and Ch2 supports half duplex with 10 Mbps speed. Both master and slave functionality are supported. A maximum of 70 slave and 8 master...Read More
Satt 19 inch rack I/O, a rack-based I/O system, can be connected to AC 800M using the CI865 interface module. CI865 supports online replacement (Hot Swap), and does not require any configuration before installation. The CI865 unit handles I/O scanning of up to 31 distributed...Read More
The AC 800M controller supports up to four CI862 CEX modules and 1,000 TRIO/Genius I/O points. TRIO supports CEX module redundancy. The CI862 unit also handles the I/O configuration and I/O scanning of up to 30 TRIO blocks.
Brand: ABB
Place of origin:...Read More
The CI860 can be used in redundant mode, up to twelve CI860 modules can be placed at one AC800 M also in redundant mode, and each of them can be connected to the same or to a separate FOUNDATION Field bus HSE subnet. The ABB FOUNDATION Field bus Linking Device LD800HSE/LD...Read More
Drive Bus supports Hot Swap. A maximum of 24 ABB drives can be connected to one CI858 and a maximum of two CI858 can be connected to an AC 800M controller. If more than one ABB drive is connected to the CI858, a branching unit NDBU is needed, which enables the construction of...Read More
Maximum number of MCUs (or other INSUM devices) per AC 800M: – 256 MCUs (or other INSUM devices) per AC 800M with PM864 or PM866. – 128 MCUs (or other INSUM devices) per AC 800M with PM861; maximum 6 CI857 per AC 800M; maximum 128 MCUs (or other INSUM devices) per CI857;...Read More
A key benefit with the CI856 interface is the possibility to reuse the majority of the existing I/O installation, including terminations and field wiring in existing ABB Master and Advant OCS installations. Single connection to S100 I/O units located in up to five I/O racks...Read More
The ABB CI855 has MB 300 network redundancy; clock synchronization; dataset communication; hot swap and per to peer communication.
Brand: ABB
Place of origin: Sweden
Delivery: 8 to 10 weeksRead More
We are professional ac800m communication module suppliers and contractors in Dubai of UAE, involved in engineering, programming and installation service. Our factory provides high quality integrator products for Yokogawa and ABB. We also supply wide range of revamping, upgrading, commissioning, immigration and configuration spare parts service. Be free to buy ac800m communication module at good price here and get quotation from us.