1.General Introduction
Honeywell Sensepoint XCD gas detector provides comprehensive monitoring of combustible, toxic and Oxygen gas hazards in potentially explosive atmospheres, it has remote monitoring capabilities for its toxic and Oxygen sensors. Its remote capability is designed to offer excellent flexibility of use and is an ideal solution for hard-to-reach locations or areas where the transmitter needs to be separate from the sensor. With remote toxic and Oxygen sensor mounting of up to 100 feet (30m) away from the transmitter, Sensepoint XCD provides a robust monitoring solution even in challenging environments where detection is difficult, including applications where the point of detection is in an area that is not easily accessible or where the detector would not be visible, like in high or low level concealed areas or outside a room being monitored.
Sensepoint XCD is also easy to use. The sensor simply plugs into the bottom of the transmitter and the transmitter automatically configures itself accordingly. Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, non-intrusive operation and reduces routine maintenance time and costs.
A tri-color backlit LCD clearly indicates the unit’s status at a glance, even from a distance. A steady green backlight indicates normal operation, flashing yellow indicates fault and flashing red indicates an alarm. All detectors are supplied pre-configured and include two programmable alarm relays, one programmable fault relay as well as an industry standard 4-20mA output (sink or source selectable) and MODBUS communication. The scale, range, relay operation, alarm set point and electronic tag number of the detector can be adjusted using the transmitter's LCD and non-intrusive magnetic switches. Outputs are automatically inhibited during adjustment, thereby reducing the risk of false alarm at the control panel during maintenance.
2.General Specifications
Items | Description |
Available Gases | Methane, Ethane, Propane, Butane, Pentane, Ethylene, Propylene, Butadiene |
Range | 0 to 5 LEL.m |
Recommended Alarm Settings | (Low) 1.0 LEL.m; (high) 3.0 LEL.m |
Path Lengths | Short Range 5m to 40m (15ft to 130ft.), Medium Range 40m to 120m (130ft to 390ft.) and Long Range 120m to 200m (390ft to 650ft.) |
Speed of Response | T90 less than 3 seconds. (under normal operating conditions) |
Output Signal | 4-20mA (maximum loop resistance 600 ohms; source & sink available) and RS485 21mA Over range 4-20mA Normal operation (0 to 5 LEL.m) 3mA Dirty optics 2.5mA Beam blocked 2mA 0mA Fault |
Digital Output | Modbus RS485 multi drop. Using DX100 (M) or XNX Universal Transmitter with Modbus option |
Operating Temperature | -40°C to +65°C (-40°F to 150°F) |
Operating Humidity | 0 to 99% RH (non-condensing) |
Operating Pressure | 91.5 to 105.5KPa (915 to 1055 mbar) (non-compensated) |
Warm-up Time | Less than 5 minutes (operational), or less than 1 hour (fully stabilized) |
Power Supply | 18V to 32VDC |
Power Consumption | Short Range Tx: 3.5W / 5.0W *maximum. Medium and Long Range Tx: 10W / 13W* maximum. Rx: 8W maximum. |
Enclosure Material | 316 stainless steel |
Weight (inc. mounting bracket) | Short Range TX: 3.5kg Medium and Long Range TX: 7kg RX: 3.5kg |
Vibration | 2 to 60Hz, max ptp amplitude 1mm. |
Misalignment Tolerance | Short Range ±0.5º (±~35cm at 40m). Medium Range ±0.5º (±~104cm at 120m). Long Range ±0.5º (±~170cm at 200m) |
EMC Standards | EN50270 |
Performance Approval | FM performance approved |
Safety Approval | ATEX, IECEx, UL, CSA, FM, GOST |
IP Rating | IP66 and IP67 |
3.Detectable Gases and Performances
Gas | User Selectable Full Scale Range | Default Range | Steps | User Selectable Cal Gas Range | Default Cal Point | Response Time Secs | Accuracy | Operating Temperature | Default Alarm Points | ||
Min. | Max. | A1 | A2 | ||||||||
Electrochemical Sensors | |||||||||||
Oxygen | 5.0%Vol. only | 25.0%Vol. | n/a | 20.9%Vol. (Fixed) | 20.9%Vol. | <30 | <±0.5%Vol. | -20°C / -4°F | 55°C / 131°F | 19.5%Vol. | 23.5%Vol. |
Hydrogen Sulfide | 10.0 to 100.0ppm | 50.0ppm | 0.1ppm | 30 to 70% | 25ppm | <50 | <±1ppm | -20°C / -4°F | 55°C / 131°F | 10ppm | 20ppm |
Carbon Monoxide | 100 to 1,000ppm | 300ppm | 100ppm | 30 to 70% | 100ppm | <30 | <±6ppm | -20°C / -4°F | 55°C / 131°F | 30ppm | 100ppm |
Hydrogen | 1,000ppm only | 1,000ppm | n/a | 30 to 70% | 500ppm | <65 | <±25ppm | -20°C / -4°F | 55°C / 131°F | 200ppm | 400ppm |
Nitrogen Dioxide | 10.0 to 50.0ppm | 10.0ppm | 5.0ppm | 30 to 70% | 5.0ppm | <40 | <±3ppm | -20°C / -4°F | 55°C / 131°F | 5.0ppm | 10.0ppm |
Catalytic Bead Sensors | |||||||||||
Flammable 1 to 8 | 20.0 to 100.0%LEL | 100%LEL | 10%LEL | 30 to 70% | 50%LEL | <25 | <±1.5%LEL | -20°C / -4°F | 5°C / 131°F | 20%LEL | 40%LEL |
Infrared Sensors | |||||||||||
Methane | 20.0 to 100.0%LEL | 100%LEL | 10%LEL | 30 to 70% | 50%LEL | <30 | <±1.5%LEL | -20°C / -4°F | 50°C / 122°F | 20%LEL | 40%LEL |
Propane | 20 to 100%LEL | 100%LEL | 10%LEL | 30 to 70% | 50%LEL | <30 | <±1.0%LEL | -20°C / -4°F | 50°C / 122°F | 20%LEL | 40%LEL |
Carbon Dioxide | 2%Vol. only | 2%Vol. | n/a | 30 to 70% | 1%Vol. | <30 | <±0.04%Vol. | -20°C / -4°F | 50°C / 122°F | 0.4%Vol. | 0.8%Vol. |
4.Order Code Selection Guide
Model | Suffix Codes | Description | |||||
SPXCD | Sensepoint XCD gas detector | ||||||
Certification | A | ATEX/IEC Ex | |||||
U | UL/C8A/Inmetro | ||||||
Enclosure Material | L | LM25 | |||||
S | Stainless steel | ||||||
Cable Entry | M | M20 | |||||
N | 3/4" NPT | ||||||
Sensor Type | F | Flammable catalytic bead | |||||
R | Flammable IR CH4 %LEL | ||||||
O | Oxygen | ||||||
H | Hydrogen sulfide | ||||||
C | Carbon monoxide | ||||||
G | Hydrogen | ||||||
P | Flammable IR Propane %LEL | ||||||
B | Carbon dioxide IR 0-2%LEL | ||||||
N | Nitrogen Dioxide | ||||||
Gas Range | X | User adjustable | |||||
1 | Fixed | ||||||
Communication | M | Modbus RTU | |||||
5.Order Code Selection Table
Part No. | Description | ||
Certified: UL/Inmetro | |||
2108N4100N | Optima Plus Gas Detector, hydrocarbon version, 4 to 20mA output, UL/INMETRO, 3/4" NPT thread spigot, electro polished 316SS, includes polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade | ||
2108N4100H | Optima Plus Gas Detector, hydrocarbon version, HART over 4 to 20mA output, UL/INMETRO, 3/4" NPT thread spigot, electro polished 316SS, includes polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade | ||
2108N4110N | Optima Plus Gas Detector, hydrocarbon version, 4 to 20mA output, UL/INMETRO, 3/4" NPT thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade | ||
2108N4110H | Optima Plus Gas Detector, hydrocarbon version, HART over 4 to 20mA output, UL/INMETRO certified, 3/4" NPT thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade | ||
2108N5100N | Optima Plus Gas Detector, hydrocarbon version for sampling systems, 4 to 20mA output, UL/INMETRO, 3/4" thread spigot, electro polished 316SS, includes black anodised aluminum flow housing | ||
2108N5100H | Optima Plus Gas Detector, hydrocarbon version for sampling systems, HART over 4 to 20mA output, UL/INMETRO, 3/4" thread spigot, electro polished 316SS, includes black anodised aluminum flow housing | ||
2108N5110N | Optima Plus Gas Detector, hydrocarbon version, 4 to 20mA output, UL/INMETRO, 3/4" thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather housing and LNP Faradex deluge/solar sunshade. Only use with gas calibrations 0 to 100%v/v Methane (2108D3050), 0 to 400,000ppm propane (2108D3100) or 0 to 600,000ppm propane (2108D3102) | ||
2108N5110H | Optima Plus Gas Detector, hydrocarbon version, HART over 4 to 20mA output, UL/INMETRO, 3/4" thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather housing and LNP Faradex deluge/solar sunshade. Only use with gas calibrations 0 to 100%v/v Methane (2108D3050), 0 to 400,000ppm propane (2108D3100) or 0 to 600,000ppm propane (2108D3102) | ||
Certified: FM/CSA | |||
2108N4200N | Optima Plus Gas Detector, hydrocarbon version, 4 to 20mA output, FM/CSA, 3/4" NPT thread spigot, electro polished 316SS, includes polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade | ||
2108N4200H | Optima Plus Gas Detector, hydrocarbon version, HART over 4 to 20mA output, FM/CSA, 3/4" NPT thread spigot, electro polished 316SS, includes polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade | ||
2108N4210N | Optima Plus Gas Detector, hydrocarbon version, 4 to 20mA output, FM/CSA, 3/4" NPT thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade | ||
2108N4210H | Optima Plus Gas Detector, hydrocarbon version, HART over 4 to 20mA output, FM/CSA certified, 3/4" NPT thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade | ||
2108N5200N | Optima Plus Gas Detector, hydrocarbon version for sampling systems, 4 to 20mA output, FM/CSA, 3/4" thread spigot, electro polished 316SS, includes black anodised aluminum flow housing | ||
2108N5200H | Optima Plus Gas Detector, hydrocarbon version for sampling systems, HART over 4 to 20mA output, FM/CSA, 3/4" thread spigot, electro polished 316SS, includes black anodised aluminum flow housing | ||
Certified: ATEX/IECEx | |||
2108N4000N | Optima Plus Gas Detector, hydrocarbon version, 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade | ||
2108N4000H | Optima Plus Gas Detector, hydrocarbon version, HART over 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade | ||
2108N4001N | Optima Plus Gas Detector, ethylene version, 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade | ||
2108N4001H | Optima Plus Gas Detector, ethylene version, HART over 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade | ||
2108N4010N | Optima Plus Gas Detector, hydrocarbon version, 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade | ||
2108N4010H | Optima Plus Gas Detector, hydrocarbon version, HART over 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade | ||
2108N4011N | Optima Plus Gas Detector, ethylene version, 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade | ||
2108N4011H | Optima Plus Gas Detector, ethylene version, HART over 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade | ||
2108N5000N | Optima Plus Gas Detector, hydrocarbon version for sampling systems, 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes black anodized aluminum flow housing | ||
2108N5000H | Optima Plus Gas Detector, hydrocarbon version for sampling systems, HART over 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes black anodised aluminum flow housing | ||
2108N5001N | Optima Plus Gas Detector, ethylene version for sampling systems, 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes black anodized aluminum flow housing | ||
2108N5001H | Optima Plus Gas Detector, ethylene version for sampling systems, HART over 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes black anodized aluminum flow housing | ||
2108N5010N | Optima Plus Gas Detector, hydrocarbon version, 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather housing and LNP Faradex deluge/solar sunshade. Only use with gas calibrations 0 to 100%v/v Methane (2108D3050), 0 to 400,000ppm propane (2108D3100) or 0 to 600,000ppm propane (2108D3102) | ||
2108N5010H | Optima Plus Gas Detector, hydrocarbon version, HART over 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather housing and LNP Faradex deluge/solar sunshade. Only use with gas calibrations 0 to 100%v/v Methane (2108D3050), 0 to 400,000ppm propane (2108D3100) or 0 to 600,000ppm propane (2108D3102) | ||
Ethylene Optima Instruments: UL/INMETRO certified | |||
2108N4101N | Ethylene calibration, with dust barrier, weather housing, deluge/heat shade, UL/INMETRO | ||
2108N4101H | Ethylene calibration, with dust barrier, weather housing, deluge/heat shade, HART output, UL/INMETRO | ||
2108N4111N | Ethylene calibration with dust barrier, weather housing, deluge/heat shade, including remote gassing cell, UL/INMETRO | ||
2108N4111H | Ethylene calibration with dust barrier, weather housing, deluge/heat shade, HART output, including remote gassing cell, UL/INMETRO | ||
2108N5101N | Ethylene calibration, for use in remote sampling systems complete with flow housing, UL/INMETRO | ||
2108N5101H | Ethylene calibration, for use in remote sampling systems complete with flow housing, HART output, UL/INMETRO | ||
Ethylene Optima Instruments: ATEX/SAA certified | |||
2108N4001N | Ethylene calibration, with dust barrier, weather housing, deluge/heat shade, ATEX | ||
2108N4001H | Ethylene calibration, with dust barrier, weather housing, deluge/heat shade, HART output, ATEX | ||
2108N4011N | Ethylene calibration with dust barrier, weather housing, deluge/heat shade, including remote gassing cell, ATEX | ||
2108N4011H | Ethylene calibration with dust barrier, weather housing, deluge/heat shade, HART output, including remote gassing cell, ATEX | ||
2108N5001N | Ethylene calibration, for use in remote sampling systems complete with flow housing, ATEX | ||
2108N5001H | Ethylene calibration, for use in remote sampling systems complete with flow housing, HART output, ATEX | ||
Optima Sampling System Options | |||
SVIP3722-1P | Class I - Div. 1, air aspirated, extractive sampling system, single channel; (both require separate purchase of XNX and Optima. C1D1 requires IS barrier for flow Sensor (supplied by others) | ||
SVIP3722-2P | Class I - Div. 1, air aspirated, extractive sampling system, two channel; (both require separate purchase of XNX and Optima. C1D1 requires IS barrier for flow Sensor (supplied by others) | ||
Remote and Duct Mounting Optima options | |||
2441-0022 | 6 wire junction box (UL certified) | ||
1283K2240 | Universal duct mounting kit - UL/CSA Version - Right angle junction box not included | ||
1283A2266 | Right angle junction box for use with 1283K2240 | ||
04200-A-1015 | Optima duct mounting Kit - use only with ATEX and SAA Versions | ||
Junction Box Interfaces | |||
OELDBXXXXXADNUX | OELD Smart Junction Box, Display, C1D1 Z1, Aluminum, 3/4"NPT, cULus | ||
OELDBXXXXXSDNUX | OELD Smart Junction Box, Display, C1D1 Z1, 316SST, 3/4“NPT, cULus | ||
2104B2381 | DX100i XP junction box UL with IS barrier | ||
2104B2382 | DX100M XP junction box UL with Modbus capability | ||
Accessories | |||
94000-A-1006 | XNX Sunshade w/ Optima cut out | ||
2108B0259 | Dust barrier | ||
2108B0276 | Weather housing | ||
2108B0280 | Storm baffle | ||
2108B0282 | Optima Plus flow housing | ||
2108D0258 | Optima Plus gassing cover | ||
2108B0272 | Optima Plus calibration cap | ||
2108D0275 | Optima Plus deluge / heat shade | ||
04230-A-1001 | Hand held interrogator ATEX certified (4V0 software) for Optima, Optima Plus and Excel | ||
2104B2351 | Hand held interrogator UL certified (4V0 software) for Optima, Optima Plus and Excel | ||
2104B2354 | Hand held interrogator CSA certified (4V0 software) for Optima, Optima Plus and Excel | ||
2108B1455 | Hand held EEPROM upgrade (4V0) | ||
04230-A-1025 | SHC protection device module and lead | ||
2104B6250 | SHC calibrator connector system 10 m | ||
00780-A-0100 | Junction box-Bartec DE1155 with continuity plate 1 x 25 mm-3 x 20 mm entries (ATEX certified) | ||
04200-A-1040 | Optima junction box adaptor plate | ||
04200-N-9002 | Fit 2 Cable glands to Optima DVC100 | ||
2441-0001 | Stainless steel tag, 3.0 in. x 0.5 in. , #10(m5) screwv | ||
2992-0038 | Adapter M25 female to 3/4 in. NPT male stainless steel | ||
157-001-075 | Adapter M20 male to 3/4 in. NPT female stainless steel | ||
2108B0701 | Optima Plus current source to sink | ||
972-080-009 | Nut retng Optima Plus weather baffle | ||
2108D0271 | Optima Plus gassing pipe | ||
402-060-291 | Cover 5.26 x 19.5 mm black vinyl | ||
SVIP3699 | Optima stainless gassing tip kit, contains 2 tips, 2 o-rings, and 2 caps | ||
OPTIMARGCCALKit | Product: RGC | Calibration Kit: Tubing, regulator (Gassing cover not required with RGC) | Contains: 998-100-004,ZCALREG1 (.3LPM) |
OPTIMACALKit | Product: Non-RGC | Calibration Kit: Tubing, gas cover, regulator | Contains: 998-100-004, 2108D0258,998-100-002, (2LPM), With GAS CELL |
