1. General Introduction
Milton Roy mROY series metering pump is a controlled-volume, hydraulically-actuated diaphragm pumps that designed for consistent chemical delivery. Its compact design contains a plunger that reciprocates at a fixed stroke, displacing a fixed volume of hydraulic fluid and thereby actuating a flexible, chemically inert PTFE diaphragm to create the pumping action. This field-proven design enables metering with repetitive steady-state accuracy at a ±1% range. There are two models A and B, provide accurate dosing of a broad spectrum of fluids, both types are built to run continually all year long with preventative maintenance, leading to decades of consistent performance. It mainly come with typical features as below:
u Hydraulically-balanced PTFE diaphragm, designed for 96,000 hours operating life, does not use seals and eliminates plunger packing maintenance.
u Liquid end bleed system makes it easier to commission a new or a newly maintained pump.
u Worm and pinion drive operating in an oil bath lubrication produces a smooth mechanical motion that eliminates wear and tear of mechanical lost motion designs and assures long gear and bearing life.
u Dust-tight cast iron housing provides a rugged enclosure for operation in the harshest plant and field environments.
u Micrometer capacity adjustment enables accurate output flow control.
u Internal hydraulic pressure relief valve automatically protects the pump’s hydraulic system from over pressure conditions.
u High-performance, adjustable, cartridge-type check valves provide positive, repeatable sealing on every pump stroke.
2. Metallic Liquid Ends for mROY A
Plunger | Gear Ratio Code | Stroke/Minute | Capacity/Pressure @ 60 Hz 1725 rpm | Capacity/Pressure @ 50 Hz 1425 rpm | ||||||||||||
60 Hz | 50 Hz | Ratings at 100 psi/7 bar | Capacity at Max. Pressure | Ratings at 100 psi/7 bar Max. Pressure | Capacity at Max. Pressure | |||||||||||
Diameter | Code | 1725 | 1425 | Capacity | Capacity | Capacity | Capacity | |||||||||
rpm | rpm | gph | L/hr | gph | L/hr | psi | bar | gph | L/hr | gph | L/hr | psi | bar | |||
3/8 in. 9.5 mm | C | 77 | 23 | 19 | 0.36 | 1.4 | 0.2 | 0.8 | 2000 | 137.9 | 0.30 | 1.1 | 0.17 | 0.6 | 2000 | 137.9 |
48 | 37 | 30 | 0.73 | 2.8 | 0.34 | 1.3 | 2000 | 137.9 | 0.61 | 2.3 | 0.28 | 1.1 | 2000 | 137.9 | ||
24 | 73 | 60 | 1.44 | 5.5 | 0.68 | 2.6 | 2000 | 137.9 | 1.20 | 4.5 | 0.57 | 2.2 | 2000 | 137.9 | ||
15 | 117 | 96 | 2.32 | 8.8 | 1.09 | 4.1 | 2000 | 137.9 | 1.93 | 7.3 | 0.91 | 3.4 | 2000 | 137.9 | ||
10 | 185 | 152 | 3.64 | 13.8 | 1.72 | 6.5 | 2000 | 137.9 | 3.03 | 11.5 | 1.43 | 5.4 | 2000 | 137.9 | ||
8 | - | 178 | - | - | - | - | - | - | 3.55 | 13.4 | 1.67 | 6.3 | 2000 | 137.9 | ||
7/16 in. 11.1 mm | D | 77 | 23 | 19 | 0.57 | 2.2 | 0.4 | 1.5 | 1800 | 124.1 | 0.48 | 1.8 | 2.58 | 1.2 | 1800 | 124.1 |
48 | 37 | 30 | 0.8 | 3.0 | 0.6 | 2.3 | 1800 | 124.1 | 0.67 | 2.5 | 3.02 | 1.9 | 1800 | 124.1 | ||
24 | 73 | 60 | 1.7 | 6.4 | 1.2 | 4.5 | 1800 | 124.1 | 1.42 | 5.4 | 0.33 | 3.8 | 1800 | 124.1 | ||
15 | 117 | 96 | 2.8 | 10.6 | 2 | 7.6 | 1800 | 124.1 | 2.33 | 8.8 | 0.50 | 6.3 | 1800 | 124.1 | ||
10 | 185 | 152 | 4.4 | 16.7 | 3.1 | 11.7 | 1800 | 124.1 | 3.67 | 13.9 | 1.00 | 9.8 | 1800 | 124.1 | ||
8 | - | 178 | - | - | - | - | - | - | 4.30 | 16.3 | 1.67 | 11.4 | 1800 | 124.1 | ||
5/8 in. 15.9 mm | E | 48 | 37 | 30 | 1.8 | 6.8 | 1.6 | 6.1 | 925 | 63.8 | 1.50 | 5.7 | 1.3 | 5.0 | 925 | 63.8 |
24 | 73 | 60 | 3.8 | 14.4 | 3.5 | 13.2 | 925 | 63.8 | 3.17 | 12 | 2.9 | 11.1 | 925 | 63.8 | ||
15 | 117 | 96 | 6.2 | 23.5 | 5.7 | 21.6 | 925 | 63.8 | 5.17 | 19.6 | 4.8 | 18.0 | 925 | 63.8 | ||
10 | 185 | 152 | 9.4 | 35.6 | 8.4 | 31.8 | 925 | 63.8 | 7.83 | 29.6 | 7.0 | 26.5 | 925 | 63.8 | ||
8 | - | 178 | - | - | - | - | - | - | 9.17 | 34.7 | 8.2 | 31.0 | 925 | 63.8 | ||
1-1/16 in. 27 mm | F | 48 | 37 | 30 | 6.1 | 23.1 | 5.5 | 20.8 | 350 | 24.1 | 5.08 | 19.2 | 4.6 | 17.3 | 350 | 24.1 |
24 | 73 | 60 | 12.3 | 46.6 | 11.2 | 42.4 | 350 | 24.1 | 10.25 | 38.8 | 9.3 | 35.3 | 350 | 24.1 | ||
15 | 117 | 96 | 19.4 | 73.4 | 18.1 | 68.5 | 350 | 24.1 | 16.17 | 61.2 | 15.1 | 57.1 | 350 | 24.1 | ||
10 | 185 | 152 | 30.0 | 113.6 | 29.0 | 109.8 | 200 | 13.8 | 25.00 | 94.6 | 24.2 | 91.5 | 200 | 13.8 | ||
8 | - | 178 | - | - | - | - | - | - | 29.28 | 110.8 | 28.3 | 107.1 | 200 | 13.8 |
3. Metallic Liquid Ends for mROY B
Plunger | Gear Ratio Code | Stroke/Minute | Capacity/Pressure @ 60 Hz 1725 rpm | Capacity/Pressure @ 50 Hz 1425 rpm | ||||||||||||
60 Hz | 50 Hz | Ratings at 100 psi/7 bar | Capacity at Max. Pressure | Ratings at 100 psi/7 bar Max. Pressure | Capacity at Max. Pressure | |||||||||||
Diameter | Code | 1725 | 1425 | Capacity | Capacity | Capacity | Capacity | |||||||||
rpm | rpm | gph | L/hr | gph | L/hr | psi | bar | gph | L/hr | gph | L/hr | psi | bar | |||
19/32 in. 15.1 mm | K | 38 | 48 | 40 | 4.7 | 17.8 | 3.3 | 12.5 | 1500 | 103.4 | 3.92 | 14.8 | 2.75 | 10.4 | 1500 | 103.4 |
25 | 72 | 60 | 7 | 26.5 | 5.6 | 21.2 | 1500 | 103.4 | 5.83 | 22.1 | 4.67 | 17.7 | 1500 | 103.4 | ||
19 | 96 | 80 | 9.5 | 36 | 7.1 | 26.9 | 1500 | 103.4 | 7.92 | 30 | 5.92 | 22.4 | 1500 | 103.4 | ||
12 | 144 | 120 | 13.3 | 50.3 | 11.4 | 43.1 | 1500 | 103.4 | 11.08 | 41.9 | 9.50 | 36 | 1500 | 103.4 | ||
10 | - | 148 | - | - | - | - | 1500 | 103.4 | 13.67 | 51.7 | 11.72 | 44.3 | 1500 | 103.4 | ||
7/8 in. 22.2 mm | L | 38 | 48 | 40 | 10 | 37.9 | 4.7 | 17.8 | 1000 | 69 | 8.33 | 31.5 | 3.92 | 14.8 | 1000 | 69 |
25 | 72 | 60 | 16 | 60.6 | 11 | 41.6 | 1000 | 69 | 13.33 | 50.5 | 9.17 | 34.7 | 1000 | 69 | ||
19 | 96 | 80 | 21 | 79.5 | 16 | 60.6 | 1000 | 69 | 17.5 | 66.2 | 13.33 | 50.5 | 1000 | 69 | ||
12 | 144 | 120 | 30.4 | 115.1 | 25.6 | 96.9 | 1000 | 69 | 25.33 | 95.9 | 21.33 | 80.7 | 1000 | 69 | ||
10 | - | 148 | - | - | - | - | 1000 | 69 | 31.24 | 118.2 | 26.31 | 99.6 | 1000 | 69 | ||
1-7/16 in. 36.5 mm | R | 38 | 48 | 40 | 27 | 102.2 | 21 | 79.5 | 400 | 27.6 | 22.5 | 85.2 | 17.50 | 66.2 | 400 | 27.6 |
25 | 72 | 60 | 42 | 159 | 36 | 136.3 | 400 | 27.6 | 35 | 132.5 | 30.00 | 113.6 | 400 | 27.6 | ||
19 | 96 | 80 | 57 | 215.7 | 51 | 193 | 400 | 27.6 | 47.5 | 179.8 | 42.50 | 160.9 | 400 | 27.6 | ||
12 | 144 | 120 | 85 | 321.7 | 79 | 299 | 400 | 27.6 | 70.83 | 268.1 | 65.83 | 249.2 | 400 | 27.6 | ||
10 | - | 148 | - | - | - | - | 400 | 27.6 | 87.357 | 330.6 | 81.19 | 307.3 | 400 | 27.6 |
4. Plastic Liquid Ends for mROY A
Plunger | Gear Ratio Code | Stroke/Minute | Capacity/Pressure @ 60 Hz 1725 rpm | Capacity/Pressure @ 50 Hz 1425 rpm | ||||||||||||
60 Hz | 50 Hz | Ratings at 100 psi/7 bar | Capacity at Max. Pressure | Ratings at 100 psi/7 bar Max. Pressure | Capacity at Max. Pressure | |||||||||||
Diameter | Code | 1725 | 1425 | Capacity | Capacity | Capacity | Capacity | |||||||||
rpm | rpm | gph | L/hr | gph | L/hr | psi | bar | gph | L/hr | gph | L/hr | psi | bar | |||
3/8 in. 9.5 mm | C | 77 | 23 | 19 | 0.32 | 1.2 | 0.28 | 1.1 | 150 | 10.3 | 0.27 | 1 | 0.23 | 0.9 | 150 | 10.3 |
48 | 37 | 30 | 0.68 | 2.6 | 0.62 | 2.3 | 150 | 10.3 | 0.57 | 2.2 | 0.52 | 2 | 150 | 10.3 | ||
24 | 73 | 60 | 1.35 | 5.1 | 1.30 | 4.9 | 150 | 10.3 | 1.13 | 4.3 | 1.08 | 4.1 | 150 | 10.3 | ||
15 | 117 | 96 | 2.20 | 8.3 | 2.10 | 7.9 | 150 | 10.3 | 1.83 | 6.9 | 1.75 | 6.6 | 150 | 10.3 | ||
7/16 in. 11.1 mm | D | 77 | 23 | 19 | 0.5 | 1.9 | 0.45 | 1.7 | 150 | 10.3 | 0.42 | 1.6 | 0.38 | 1.4 | 150 | 10.3 |
48 | 37 | 30 | 0.7 | 2.6 | 0.65 | 2.5 | 150 | 10.3 | 0.58 | 2.2 | 0.54 | 2 | 150 | 10.3 | ||
24 | 73 | 60 | 1.5 | 5.7 | 1.4 | 5.3 | 150 | 10.3 | 1.25 | 4.7 | 1.17 | 4.40 | 150 | 10.3 | ||
15 | 117 | 96 | 2.5 | 9.5 | 2.4 | 9.1 | 150 | 10.3 | 2.08 | 7.9 | 2.00 | 7.60 | 150 | 10.3 | ||
5/8 in. 15.9 mm | E | 48 | 37 | 30 | 1.6 | 6.1 | 1.5 | 5.7 | 150 | 10.3 | 1.33 | 5 | 1.3 | 4.7 | 150 | 10.3 |
24 | 73 | 60 | 3.5 | 13.2 | 3.4 | 12.9 | 150 | 10.3 | 2.92 | 11.1 | 2.8 | 10.7 | 150 | 10.3 | ||
15 | 117 | 96 | 5.6 | 21.2 | 5.5 | 20.8 | 150 | 10.3 | 4.67 | 17.7 | 4.6 | 17.3 | 150 | 10.3 | ||
1-1/16 in. 27 mm | F | 48 | 37 | 30 | 5.7 | 21.6 | 5.6 | 21.2 | 150 | 10.3 | 4.75 | 18 | 4.7 | 17.7 | 150 | 10.3 |
24 | 73 | 60 | 11.3 | 42.8 | 11.2 | 42.4 | 150 | 10.3 | 9.42 | 35.7 | 9.3 | 35.3 | 150 | 10.3 | ||
15 | 117 | 96 | 18.1 | 68.5 | 18.0 | 68.1 | 150 | 10.3 | 15.08 | 57.1 | 15.0 | 56.8 | 150 | 10.3 |
5. Plastic Liquid Ends for mROY B
Plunger | Gear Ratio Code | Stroke/Minute | Capacity/Pressure @ 60 Hz 1725 rpm | Capacity/Pressure @ 50 Hz 1425 rpm | ||||||||||||
60 Hz | 50 Hz | Ratings at 100 psi/7 bar | Capacity at Max. Pressure | Ratings at 100 psi/7 bar Max. Pressure | Capacity at Max. Pressure | |||||||||||
Diameter | Code | 1725 | 1425 | Capacity | Capacity | Capacity | Capacity | |||||||||
rpm | rpm | gph | L/hr | gph | L/hr | psi | bar | gph | L/hr | gph | L/hr | psi | bar | |||
7/8 in. 22.2 mm | L | 38 | 48 | 40 | 10 | 37.9 | 9.7 | 36.7 | 150 | 10.3 | 8.33 | 31.5 | 8.1 | 30.6 | 150 | 10.3 |
25 | 72 | 60 | 16 | 60.6 | 15.7 | 59.4 | 150 | 10.3 | 13.33 | 50.5 | 13.1 | 49.5 | 150 | 10.3 | ||
19 | 96 | 80 | 21 | 79.5 | 20.7 | 78.3 | 150 | 10.3 | 17.5 | 66.2 | 17.3 | 65.3 | 150 | 10.3 | ||
12 | 144 | 120 | 30.4 | 115.1 | 30.1 | 113.9 | 150 | 10.3 | 25.33 | 95.9 | 25.1 | 94.9 | 150 | 10.3 | ||
10 | - | 148 | - | - | - | - | 150 | 10.3 | 31.24 | 118.2 | 30.93 | 117.1 | 150 | 10.3 | ||
1-7/16 in. 36.5 mm | R | 38 | 48 | 40 | 27 | 102.2 | 26.0 | 98.4 | 150 | 10.3 | 22.5 | 85.2 | 21.7 | 82.0 | 150 | 10.3 |
25 | 72 | 60 | 42 | 159 | 41.0 | 155.2 | 150 | 10.3 | 35 | 132.5 | 34.2 | 129.3 | 150 | 10.3 | ||
19 | 96 | 80 | 57 | 215.7 | 56.0 | 212 | 150 | 10.3 | 47.5 | 179.8 | 46.7 | 176.6 | 150 | 10.3 | ||
12 | 144 | 120 | 85 | 321.7 | 84.0 | 317.9 | 150 | 10.3 | 70.83 | 268.1 | 70.0 | 265.0 | 150 | 10.3 | ||
10 | - | 148 | - | - | - | - | 150 | 10.3 | 87.357 | 330.6 | 86.33 | 326.8 | 150 | 10.3 |
6. Selection table of mROY series metering pump
Frame/Range | MRA | mRoy type A | ||||||||||||
MRB | mRoy type B | |||||||||||||
Number of Heads | 1 | Simplex | ||||||||||||
2 | Duplex | |||||||||||||
Liquid End Material | 1 | 316L SS | ||||||||||||
2 | PVC | |||||||||||||
5 | Alloy 20 | |||||||||||||
6 | Hast C | |||||||||||||
7 | PVDF | |||||||||||||
8 | Fluoride | |||||||||||||
Plunger Diameter | C | MRA-3/8 in. (9.5 mm) | ||||||||||||
D | MRA- 7/16 in. (11.1 mm) | |||||||||||||
E | MRA- 5/8 in. (15.9 mm) | |||||||||||||
F | MRA- 1-1/16 in. (27 mm) | |||||||||||||
K | MRB- 19/32 in. (15.1 mm) | |||||||||||||
L | MRB- 7/8 in. (22.2 mm) | |||||||||||||
R | MRB- 1-7/16 in. (36.5 mm) | |||||||||||||
Gear Ratio Code | 77 | 23 strokes (60Hz, 1725RPM), 19 strokes (50Hz, 1425RPM) | ||||||||||||
48 | 37 strokes (60Hz, 1725RPM), 30 strokes (50Hz, 1425RPM) | |||||||||||||
24 | 73 strokes (60Hz, 1725RPM), 60 strokes (50Hz, 1425RPM) | |||||||||||||
15 | 117 strokes (60Hz, 1725RPM), 96 strokes (50Hz, 1425RPM) | |||||||||||||
10 | 185 strokes (60Hz, 1725RPM), 152 strokes (50Hz, 1425RPM) | |||||||||||||
08 | 178 strokes (50Hz, 1425RPM) | |||||||||||||
Motor or IEC/NEMA Mount | S1 | S1 style | ||||||||||||
.. | Others to be selected. | |||||||||||||
Type Motor Mount | C | Close coupled | ||||||||||||
A | API Flange with flexible coupling | |||||||||||||
Suction Connections | P | Metallic Liquid Ends - Horizontal Connections, NPT - Female | ||||||||||||
H | Metallic Liquid Ends - Horizontal Connections, Gas - Female | |||||||||||||
G | Flange - Metallic Liquid Ends, ANSI 1/2 in. with raised face, Class 150 | |||||||||||||
J | Flange - Metallic Liquid Ends, ANSI 1/2 in. with raised face, Class 300 | |||||||||||||
K | Flange - Metallic Liquid Ends, ANSI 1/2 in. with raised face, Class 600 | |||||||||||||
L | Flange - Metallic Liquid Ends, ANSI 1/2 in. with raised face, Class 1500 | |||||||||||||
M | Flange - Metallic Liquid Ends, EN1759-1 DN15 flange, Class 150 | |||||||||||||
N | Flange - Metallic Liquid Ends, EN1759-1 DN15 flange, PN40 | |||||||||||||
Q | Flange - Metallic Liquid Ends, EN 1759-1 DN15 flange, Class 300 | |||||||||||||
R | Flange - Metallic Liquid Ends, EN 1759-1 DN15 flange, Class 600 | |||||||||||||
S | Flange - Metallic Liquid Ends, EN 1759-1 DN15 flange, Class 1500 | |||||||||||||
P | Plastic Liquid Ends, NPT Vertical | |||||||||||||
4 | Plastic Liquid Ends, Gas Vertical Male | |||||||||||||
3 | Plastic Liquid Ends, PVC loose flange, on 1/2 in. pipe | |||||||||||||
P | Flange - Plastic Liquid Ends, NPT Vertical | |||||||||||||
4 | Flange - Plastic Liquid Ends, Gas Vertical Male | |||||||||||||
3 | Flange - Plastic Liquid Ends, PVC loose flange, on 1/2 in. pipe | |||||||||||||
Discharge Connections | P | Same as Suction Connections | ||||||||||||
Seal Material (Metallic Liquid Ends) | N | Standard - Typically Viton | ||||||||||||
E | EPDM | |||||||||||||
T | Teflex | |||||||||||||
Capacity Control | S | Stainless steel manual micrometer | ||||||||||||
L | Stainless steel locking manual micrometer (API 675) | |||||||||||||
W | ACC; Waterproof: 24VDC; 85V to 260V 1 phase 50/60 Hz | |||||||||||||
E | ACC; Ex-proof: 24VDC; 85V to 260V 1 phase 50/60 Hz, IP68 Ex d IIBT4 | |||||||||||||
R | Pneumatic Actuator type STI. For use outside of ATEX area | |||||||||||||
T | Pneumatic Actuator type STI. For use inside of ATEX area | |||||||||||||
Diaphragm Rupture Detection | N | None | ||||||||||||
1 | Double diaphragm with pressure switch | |||||||||||||
2 | Double diaphragm with explosion-proof pressure switch | |||||||||||||
3 | Double diaphragm w/pressure gauge | |||||||||||||
9 | Double diaphragm w/pressure transmitter and manifold. | |||||||||||||
Base | N | None | ||||||||||||
Y | Yes |
7. Dimension of mROY series metering pump
Address: P.O. Box 17033, Jebel Ali Free Zone - South 2 Dubai, United Arab Emirates
Tel: +971558915937
Fax: +971558915956
E-mail:
info@rostockgroup.com
technical@rostockgroup.com
commercial@rostockgroup.com
Get the latest special offers and discount information sent to your email address.
Copyright © Rostock Group Co.,Limited All Rights Reserved. Sitemap