1. General Introduction
The AI810 Analog Input Module has 8 channels. Each channel can be either a voltage or current input. The current input is able to handle a short circuit to the transmitter supply at least 30 V d.c without damage. Current limiting is performed with a PTC resistor. The input resistance of the current input is 250 ohm, PTC included.
The voltage input is able to withstand an over or under voltage of at least 30 V d.c. Input resistance is 290k ohm. Transmitter supply can be connected to L1+, L1- and/or L2+, L2-.
2. Specification of AI810
General info | |
Type | Analog Input |
Signal specification | 0...20 mA, 4...20 mA |
Article number | 3BSE008516R1 |
Number of channels | 8 |
Signal type | Unipolar single ended |
HART | No |
SOE | No |
Redundancy | No |
High Integrity | No |
Intrinsic safety | No |
Mechanics | S800 |
Detailed data | |
Resolution | 12 bit |
Input impedance | 290 kΩ (voltage input) 230 - 275 kΩ (current input) |
Isolation | GroupWise isolated from ground |
Under/over range | 5% / +15% |
Error | Max 0,1% |
Temperature drift | Typ. 50 ppm/°C, Max. 80 ppm/°C |
Input filter (rise time 0-90%) | 140 ms |
Update cycle time | 8 ms |
Current limiting | Transmitter power can be current limited by the MTU |
Maximum field cable length | 600 meters (656 yards) |
Max input voltage (non destructive) | 30 V d.c. |
NMRR, 50Hz, 60Hz | > 40dB |
Rated insulation voltage | 50 V |
Dielectric test voltage | 500 V a.c. |
Power dissipation | 1.5 W |
Current consumption +5 V Module bus | 70 mA |
Current consumption +24 V Module bus | 40 mA |
Current consumption +24 V external | 0 |
Diagnostics | |
Front LED’s | F(ault), R(un), W(arning) |
Supervision | Internal power supply |
Status indication of supervision | Module Error, Module Warning, Channel error |
Environmental and certification | |
CE mark | Yes |
Electrical safety | IEC 61131-2, UL 508 |
Hazardous location | C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2 |
Marine certification | ABS, BV, DNV-GL, LR, RS, CCS |
Protection rating | IP20 according to IEC 60529 |
Corrosive atmosphere ISA-S71.04 | G3 |
Climatic operating conditions | 0 to +55 °C (Storage -25 to +70 °C), RH=5 to 95 % no condensation, IEC/EN61131-2 |
Pollution degree | Degree 2, IEC 60664-1 |
Mechanical operating conditions | IEC/EN 61131-2 |
EMC | EN 61000-6-4 and EN 61000-6-2 |
Overvoltage categories | IEC/EN 60664-1, EN 50178 |
Equipment class | Class I according to IEC 61140; (earth protected) |
Max ambient temperature | 55 °C (131 °F), for vertical mounting 40 °C (104 °F) |
RoHS compliance | DIRECTIVE/2011/65/EU (EN 50581:2012) |
WEEE compliance | DIRECTIVE/2012/19/EU |
Comp ability | |
Use with MTU | TU810, TU812, TU814, TU818, TU830, TU833, TU835, TU838, TU850 |
Keying code | AE |
Dimensions | |
Width | 45 mm (1.77”) |
Depth | 102 mm (4.01”), 111 mm (4.37”) including connector |
Height | 119 mm (4.7”) |
Weight | 0.2 kg (0.44 lbs.) |
3. Selection table of I/O Modules
Name | HART | High Integrity | Intrinsic safety | Mechanics | Redundancy | SOE | Type |
AI801 | No | No | No | S800L | No | No | Analog Input |
AI810 | No | No | No | S800 | No | No | Analog Input |
AI815 | Yes | No | No | S800 | No | No | Analog Input |
AI820 | No | No | No | S800 | No | No | Analog Input |
AI825 | No | No | No | S800 | No | No | Analog Input |
AI830A | No | No | No | S800 | No | No | Analog Input |
AI835A | No | No | No | S800 | No | No | Analog Input |
AI843 | No | No | No | S800 | Yes | No | Analog Input |
AI845 | Yes | No | No | S800 | Yes | No | Analog Input |
AI880A | Yes | Yes | No | S800 | Yes | No | Analog Input |
AI890 | No | No | Yes | S800 | No | No | Analog Input |
AI893 | No | No | Yes | S800 | No | No | Analog Input |
AI895 | Yes | No | Yes | S800 | No | No | Analog Input |
AO801 | No | No | No | S800L | No | No | Analog Output |
AO810V2 | No | No | No | S800 | No | No | Analog Output |
AO815 | Yes | No | No | S800 | No | No | Analog Output |
AO820 | No | No | No | S800 | No | No | Analog Output |
AO845A | Yes | No | No | S800 | Yes | No | Analog Output |
AO890 | No | No | Yes | S800 | No | No | Analog Output |
AO895 | Yes | No | Yes | S800 | No | No | Analog Output |
Address: P.O. Box 17033, Jebel Ali Free Zone - South 2 Dubai, United Arab Emirates
Tel: +971558915937
Fax: +971558915956
E-mail:
info@rostockgroup.com
technical@rostockgroup.com
commercial@rostockgroup.com
Get the latest special offers and discount information sent to your email address.
Copyright © Rostock Group Co.,Limited All Rights Reserved. Sitemap