1. General Introduction
As K-, E- and H-System devices have formerly been equipped with programming sockets with different standard dimensions (3.55 mm x 18.3 mm, see drawing, pos. 3 – newer devices 3.5 mm x 14 mm, pos. 1), an adapttr (pos. 2) for the parameterisation of all devices is attached to K-ADP-USB. The 18.3 mm version can still be used for urgent service assignments. However, the user must be aware of the fact that the plug protrudes from new units by approx. 4 mm. Extensive pushing of the plug may lead to damage on units. For information about programming and operating software,
2. General Specification for K-ADP-USB
Model | K-ADP-USB |
Electrical specifications | |
Current consumption | 50 mA (via USB) |
Galvanic isolation | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff |
Directive conformity | |
Electromagnetic compatibility | |
Directive 2014/30/EU | EN 55032:2012 EN 61000-3-2:2014 EN 61000-3-3:2013 EN 61000-4-2:2009 EN 61000-4-3:2006+A1:2008+A2:2010 EN 61000-4-4:2012 EN 61000-4-6:2014 EN 61000-4-8:2010 EN 61000-4-11:2004 |
Ambient conditions | |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Mechanical specifications | |
Connection | |
Device | 1 x connector 3.5 mm and 3.55 mm |
Computer | 1 x Type A USB |
Mass | 85 g |
Cable length | 3 m |
3. Dimension
