AFV30D

Memory   Protection During Power Failure

Battery S9548FA,

Back-up for Main Memory: Max. 72 hours,

Recharge Time: Min. 48 hours

READY   Contact Output

2   terminals (NC, C), Contact Points open during FCU failure, Contact Rating: 30   V DC, max. 0.3 A

Communication   Interface

Vnet/IP   Interface: Dual-redundant

No.   of Node Units Connectable

Max. 13 of ESB Bus   Node Units ANB10 or Optical ESB Bus Node Units ANB11

Connection   to ESB Bus Node Unit

ESB Bus Coupler   Module EC401 or EC402 required.

For the   dual-redundant configuration of the processor modules, EC401 or EC402 must be   installed in both slot 7 and slot 8 .

In case ESB Bus has   a single configuration, EC401 or EC402 must be installed in slot 7 and keep   slot 8 empty.

Power   Supply Module

Voltage: 220-240 V   AC, Frequency: 50/60 Hz, PW482;

Voltage: 100-120 V   AC, Frequency: 50/60 Hz, PW481;

Voltage: 24 V DC,   PW484.

2 modules for   dual-redundant configuration.

Processor   Module

CP461 and   CP471(applicable for R6.05 or later version),

A dual-redundant   configuration is enabled by using 2 identical modules

I/O   Module Slots

Support   max. 8 I/O modules

AFV30D

Duplexed Field Control Unit (for Vnet/IP and FIO, 19-inch Rack   Mountable)

-A

Standard type (for CP471)

-S

Standard type (for CP461)

4

Dual-redundant Vnet/IP, dual-redundant power supply

1

Always 1

1

100 - 120 V AC power supply

2

220 - 240 V AC power supply

4

24 V DC power supply

0

Basic type

1

With ISA Standard G3 option

5

Basic type with no explosion protection

6

With ISA Standard G3 option and no explosion protection

E

Basic type with explosion protection

F

With ISA Standard G3 option and explosion protection

1

LFS1700 Control function for field control station( for CP461)

2

Always 2 (R6.01 or later)

Option

Codes

/HKU

With HKU interface

/ATDOC

Explosion Protection Manual

/MRN

With Marine Standards

AFV30D-S41251

CP461, 220V, Basic, R5 or earlier

AFV30D-S41252

CP461, 220V, Basic, R6