1.General Introduction
Yokogawa PH8HS is a submersion type with 2 inch pipe vertical or horizontal mounting method, it's applicable for General pH Sensor PH8ERP, PH8EFP, General ORP Sensor OR8ERG, OR8EFG, PH4 Sensor PH4P, PH4PT,PH4F,PH4FT,PH4C, PH4CT and OR4 Sensor OR4P, OR4C.
2.General Specification
Items | Description |
Applicable sensors | PH8ERP, PH8EFP, OR8ERG, OR8EFG, PH4P, PH4PT,PH4F,PH4FT,PH4C, PH4CT, OR4P, OR4C |
Mounting | 2 inch pipe mounting vertical or horizontal |
Cleaning method | Jet cleaning, brush cleaning or ultrasonic cleaning |
Material | Holder: Polypropylene or stainless steel (316 SS) Flange: Polypropylene (refer to dimensions) or stainless steel (316 SS) O-ring: FKM or FFKM Mounting bracket: Galvanized iron or stainless steel (304 SS) |
Cleaning unit | Ultrasonic, Jet and brush |
Measuring temperature | No Cleaning: -5 to 100°C With Cleaning: -5 to 80°C |
Flow rate | 2 m/s or less |
Measuring pressure | Submersion depth 3m max |
3.Model Selection
Main Code | Suffix Code | Description | ||||||
PH8HS | Submersion type holder | |||||||
Material | -PP | Polypropylene | ||||||
-S3 | Stainless steel | |||||||
-ST | Translucent polypropylene | |||||||
Pipe length | -10 | 1.0m | ||||||
-15 | 1.5m | |||||||
-20 | 2.0m | |||||||
-25 | 2.5m | |||||||
-30 | 3.0m | |||||||
pH Measuring System | -T | Always -T | ||||||
Cleaning Device | -NN | No Cleaning | ||||||
-S3 | For ultrasonic cleaning (Transducer: 316 SS) | |||||||
-TN | For ultrasonic cleaning (Transducer: Titanium) | |||||||
-HC | For ultrasonic cleaning (Transducer: Hastelloy C) | |||||||
-JT | For jet cleaning. The solenoid valve must be specified separately. | |||||||
-BR | For brush cleaning. The solenoid valve must be specified separately. | |||||||
Cable Length or Conne. Size | -NN | No Cleaning | ||||||
-C3 | 3m | |||||||
-C5 | 5m | |||||||
-C6 | 7m | |||||||
-C7 | 10m | |||||||
-C8 | 15m | |||||||
-C9 | 20m | |||||||
-JP | Rc1/2 (for Jet or Brush Cleaning) | |||||||
-NP | 1/2 NPT (for Jet or Brush Cleaning) | |||||||
Style Code | -A | Style A | ||||||
Option | Mounting | /MS1 | Mounting bracket: 1 set | |||||
/MS2 | Mounting bracket: 2 sets | |||||||
/MS3 | Stainless steel mounting bracket: 1 set | |||||||
/MS4 | Stainless steel mounting bracket: 2 sets | |||||||
/MS9 | Mounting hardware for calibration holder | |||||||
Special Mounting | /F1 | JIS 10K 100 FF eq. Flange Mounting (Without Cleaner) | ||||||
/F2 | JIS 10K 200 FF eq. Flange Mounting (With Cleaner) | |||||||
O-ring | /PF | Perfluoroelastomer (FFKM) | ||||||
4.External Dimensions
