1.General Introduction
Yokogawa DO30G dissolved oxygen sensor is designed for use in water treatment plants with a fast galvanic cell, such as sewage treatment works, effluent activated sludge process, and potable water treatment. It is also effective in river monitoring, intake protection, fish farming and other fields where water quality is important. This galvanic cell has a fast response time and good long term stability, and features replaceable diaphragm and cable for easy maintenance. A temperature sensor is incorporated for compensation. The DO30G sensor can be used in either the PB350G/PB360G floating ball holders or in the DOX8HS submersion type holder.
2.General Specifications
Items | Description |
Dissolved Oxygen | 0 to 20 mg/L (ppm) |
Liquid Temperature | 0 to 40˚C |
Liquid Pressure | 0 to 100kPa |
Flow speed | 20 cm/s or more |
Sensor for Temperature Compensation | Pt1000 |
Wetted Part Material | rigid polyvinyl chloride, stainless steel, fluorinated ethylene propylene, nitride rubber, heat-resistant soft polyvinyl chloride and polycarbonate |
Cable Length | 3 m, 5 m, 10 m, 15 m and 20 m |
Repeatability | 0.1 mg/L or 3% FS, whichever is greater(including sensor) |
Temperature Compensation Error | Within ±3% FS (including sensor) for a ±5˚C change in the range of 0 to 40˚C |
Response Time | Within 2 minutes(90% response)(including sensor) |
3.Model Selection
Main Code | Suffix Codes | Description | |||
DO30G | Dissolved Oxygen Sensor | ||||
— | -NN | Always -NN | |||
Membrane thickness | -50 | 50μm | |||
Cable length | -03 | 3m | |||
-05 | 5m | ||||
-10 | 10m | ||||
-15 | 15m | ||||
-20 | 20m | ||||
Cable terminal | -PN | Pin terminal | |||
-FK | Fork terminal | ||||
-FL | M4 ring terminal | ||||
4.External Dimensions
