1.General Introduction
Honeywell FS10 flame detector is based on high-speed microprocessor detection and process control system specially designed for liquid and powder coating applications, quickly detects the presence of a flame, reacts by initiating a shutdown of the electrostatic finishing process in a matter of milliseconds; and effectively interrupts the fire before residues and wet paint films can ignite. FS10 flame detector is the only system that provides a two-stage response: an ALERT for spray gun "fireball" type fires and if the fire continues, a FIRE ALARM is declared in 4-5 seconds. FS10 flame detector is vastly superior to conventional detectors due to the electro-optical quantum infrared sensors array and the ability to accurately detect fires without false alarms. The FS System 10 is available in both wall-mount controller and card controller configurations.(For additional information on card controller, consult the factory.) The detector is mounted in an explosion-proof housing. The wall-mounted controller is a self-contained system mounted in a NEMA 12 enclosure with LCD display and LED status lights. Three 10-amp mechanical relays have been incorporated for shutting down the paint flow, electrostatics and conveyor. Event history and fire tech data are reported by the detector in real time and data, then stored in the controller’s non-volatile memory. FirePic™ and SnapShot™ data can be downloaded from the RS-232 port of the controller from your PC. The controller may operate with one or two detectors.
2.General Specifications
Items | Description |
Sensitivity | 45 ft. and 30 ft. to a 1 sq. ft. gasoline fire |
Response time | Alert: 0.3 second (response to “fireball” type fires) Fire Early Warning: 1 second (early response to a fire alarm) Fire Alarm: Less than 5 seconds (if fire continues |
Field of view | 90° (± 45° horizontal and vertical) |
Spectral sensitivity | Visible: 400 – 700 nanometers Near Band IR: 0.7 – 1.1 microns Wide Band IR: 0.7 – 3.5 microns |
Operating voltage | 24 VDC nominal (18-32 VDC) - Regulated |
Power consumption | Normal: 85mA (typical); Alarm: 120mA (typical) |
Output relays | Alert/Early Warning: SPST, N.O. Fire Alarm: SPST, N.O. Fault: SPST, N.O. with no power Contact ratings: 1 amp @ 24 VDC |
Normal Operation | Fault relay is Energized, Non-Latching All other relays are De-energized Fire and Alert relays are available Latching or Non-Latching |
Operating Temperature | Operating: -40º to +185ºF (-40º to +85ºC) |
Humidity Range | 10% to 90% relative humidity, non-condensing |
Weight | Aluminum: 3.8 lbs (1.7 kg) |
Enclosure | Copper-Free Powder Coated Aluminum or optional 316 Stainless Steel; NEMA 3, 4 and 4X |
Conduit Entries | Two ¾” NPT |
Certifications | FM, CE |
Dimensions | 4.81 in. diameter; 4.65 in. deep |
Mounting | Swivel bracket assembly - optional |
Warranty | Two years from date of shipping |
3.Quick Reference Chart
FS24X-2 | FS24X-9 | FS20X | FS10 | ||
SPECTRALSENSITIVITY | Ultraviolet Band (0.18 - 0.26 μ) | √ | |||
Visible Band (0.4 - 0.7 μ) | √ | √ | √ | √ | |
Near Band IR (0.7 μ – 1.1 μ) | √ | √ | √ | √ | |
Wide Band IR1 (1.1 – 3 μ) | √ | √ | √ | √ | |
Wide Band IR1 (1.1 – 3.5 μ) | √ | ||||
Wide Band IR2 (3.0 – 5.0 μ) | √ | √ | |||
SENSITIVITY(feet) | Very High | 200+ | 200+ | 200+ | 60 |
High | 150 | 150 | 150 | 45 | |
Medium | 100 | 100 | 100 | 30 | |
Low | 50 | 50 | 50 | 15 | |
RESPONSE | Fireball / Quick Response Option (< 500 mS) | √ | |||
Acetylene Long Range Option | √ | ||||
OTHER | Field of View (conical) | 110° | 90° | 90° | 90° |
HART Option | √ | √ | √ | ||
Modbus Built-In | √ | √ | √ | ||
ENCLOSURES | Aluminum Class I, Div._1 | √ | √ | √ | √ |
316 Stainless Steel Class I, Div._1 | √ | √ | √ | √ | |
APPROVALS | FM | √ | √ | √ | √ |
cFM | √ | √ | √ | √ | |
ATEX | √ | √ | √ | √ | |
IECEx | √ | √ | √ | √ | |
INMETRO | √ | √ | √ | ||
GOST-R | √ | √ | √ | ||
SIL 2 Compliant | √ | √ | |||
TEST LAMPS/SOURCE | TL-2055 | √ | √ | √ | |
TL-1055 | √ | √ | √ | ||
FS-846-B | √ | ||||
MOUNT | SM4 bracket | √ | √ | √ | √ |
4.Order Code Selection
Part No. | Description |
Card Controller with FS10 Electro-Optical Fire Detector | |
Option-2FL | 2FL system: liquid paint spray line applications with two (2) fire signal relay levels |
Option-2GF | 2GF system: general finishing applications with process control and fire alarm signal relays |
Option-2WE | 2WE system: powder coating and paint spray line applications with two (2) fire signal relay levels |
Option-2WL | 2WL system: paint spray line applications with three (3) fire signal relay levels |
Option-2GE | 2GE system: powder coating and paint spray line applications with two (2) fire signal relay levels |
BP-1 | Backplane for 1 card controller |
BP-2 | Backplane for 2 card controllers |
BP-4-L9 | Backplane for 4 card controllers |
Spare Parts - FS10 Wall Mount Controller and Card Controller | |
SW-5143-001 | Replacement keypad for FS10 wall mount |
FS10-CARD-2FL | Liquid paint spray line applications with two (2) fire signal relay levels |
FS10-CARD-2GE | Powder coating and paint spray line applications with two (2) fire signal relay levels |
FS10-CARD-2GF | General finishing applications with process control and fire alarm signal relays |
FS10-CARD-2WL | Paint spray line applications with three (3) fire signal relay levels |
FS10-Detector | Model FS10 fire Detector for use with wall mount controller or card controller |
FS10-DET-MODULE | Replacement electronics module for fire detector for the above systems |
Detector Cables | |
CAB-50 | 50ft. card controller cable. Connects fire detector to controller |
CAB-100 | 100ft. card controller cable. Connects fire detector to controller |
FS10 Stand Alone (Unitized) Electro-Optical Fire Detectors | |
FS10-R30 | Copper-free aluminum housing including ALERT / FIRE EARLY WARNING relay, 30ft. sensitivity (latching alert and alarm relays) |
FS10-R30-SS | 316 stainless steel housing including ALERT / FIRE EARLY WARNING relay, 30ft. sensitivity (latching alert and alarm relays) |
FS10-R30-EC | Copper-free aluminum housing including ALERT / FIRE EARLY WARNING relay, 30ft. sensitivity (latching alert and alarm relays), Normally Energized with Normally Closed Contacts |
FS10-R45 | Copper-free aluminum housing 45ft. sensitivity (latching alarm relays) |
FS10-R45-SS | 316 stainless steel housing 45ft. sensitivity (latching alarm relays) |
FS10-RN30 | Copper-free aluminum housing including ALERT / FIRE EARLY WARNING relay, 30ft. sensitivity (non-latching alert and alarm relays) |
FS10-RN30-SS | 316 stainless steel housing including ALERT / FIRE EARLY WARNING relay, 30ft. sensitivity (non‑latching alert and alarm relays) |
FS10-RN45 | Copper-free aluminum housing 45ft. sensitivity (non-latching alarm relays) |
FS10-RN45-SS | 316 Stainless steel housing 45ft. sensitivity (non-latching alarm relays) |
Spare Parts - FS10 Stand Alone (Unitized) Electro-Optical Fire Detectors | |
FS10-R30-MOD | Replacement electronics module for Model FS10-R30 stand alone fire Detector (latching alert and alarm relays) |
FS10-R30-EC-MOD | Replacement electronics module for Model FS10-R30 stand alone fire Detector (latching alert and alarm relays), Normally Energized with Normally Closed Contacts |
FS10-R45-MOD | Replacement electronics module for Model FS10-R45 stand alone fire Detector (latching alarm relay) |
FS10-RN30-MOD | Replacement electronics module for Model FS10-RN30 stand alone fire Detector (non-latching alert and alarm relays) |
FS10-RN45-MOD | Replacement electronics module for Model FS10-RN45 stand alone fire Detector (non-latching alarm relay) |
Card Controller with FS10 Electro-Optical Fire Detector | |
FS10R-GR-Kit | Stainless steel grill Kit for FS10-R and FS10-CS Detectors (Killark housing) Kit includes: (1) SS grill, (2) SS brackets, and (2) SS screws |
RS-232 Cable | RS232 computer Cable for connection from FS7-130-SX, S7-2175, option-1 or option-2 controllers or interface box to PC |
PSU-12 | 110/220 VAC, 50-60 HZ input /15 VDC output : universal Charger for interface box or DD Series, FT Series and TL Series test lamps |
Accessories | |
SM4 | Stainless steel swivel mount allows Detector to be pointed in any direction |
FS-846-B | Test lamp Battery operated for testing FS10 fire Detectors up to 10ft. |
EXPL-1 | EXTENSION POLE FOR DPC-12 Extension Pole for placing and removing Disposable Protective Covers on FS10 Detectors |
DPC-12 | Disposable protective covers keeps powder or paint off the window lens of the FS10 fire Detector (12 per bag) (for use with FS10 only) |
DASA1-P | Air shield for powder applications protects FS10 fire Detector window lens from powder build-up. Supplied with fitting for 1/4 in. tubing (can also be used with FS24X, FS20X, SS4, and SS2) |
DASA6-N | Air shield for powder applications protects FS10 Fire Detector window lens from powder build-up. Supplied with fitting for 6 mm tubing |
Address: P.O. Box 17033, Jebel Ali Free Zone - South 2 Dubai, United Arab Emirates
Tel: +971558915937
Fax: +971558915956
E-mail:
info@rostockgroup.com
technical@rostockgroup.com
commercial@rostockgroup.com
Get the latest special offers and discount information sent to your email address.
Copyright © Rostock Group Co.,Limited All Rights Reserved. Sitemap